Lenovo has announced a new concept laptop at Mobile World Congress that encourages you to work outside by reducing your dependence on power cables. The Yoga Solar PC is an early proof of concept device featuring a solar panel integrated into the laptop’s lid. It can harness light from any source to boost its battery, but as with most solar-powered devices, you’ll get the most power while working outside on a clear, sunny day.

The company hasn’t announced any plans to put the Yoga Solar PC into production. However, its ThinkBook Plus Gen 6, featuring an expanding and rollable OLED display, initially debuted as a concept at Mobile World Congress in 2023 but will be available sometime in June 2025 for $3,499.

The Yoga Solar PC’s light-absorbing panel is made up of 84 solar cells featuring a Back Contact cell design. All of the panel’s mounting brackets and electrical contacts that collect and transfer the energy that’s generated are located behind the solar cells. The front of the panel is able to capture more light, allowing Lenovo to achieve a conversion rate – how much of the captured sunlight is converted to usable electricity – of more than 24 percent.

That’s more efficient than most of the silicone-based solar panels used in consumer electronics today, but a bit behind panels featuring an added layer of perovskite film on top that can boost light absorption and efficiencies to up to 43 percent. Even at 24 percent efficiency, Lenovo says the Yoga Solar PC’s panel “can absorb and convert enough solar energy from direct sunlight in 20 minutes to power up to one hour of video playback.” The company says it’s still evaluating how much power is produced in conditions with lower light.

Powered by an Intel Lunar Lake paired with 32GB of RAM and 1TB of storage, the Yoga Solar PC measures in at 15 millimeters thick and weighs around 2.29 pounds with its 14-inch OLED display. To help ensure users are able to best take advantage of the light available to them – whether indoors or outside – the laptop will also feature Lenovo’s Dynamic Solar Tracking system software showing how much current and voltage the solar panel is producing.

For existing Yoga laptop users wanting to reduce their battery anxiety while touching grass, Lenovo also revealed an external solar power kit concept. It’s a standalone solution that opens like a book to reveal a pair of side-by-side solar panels that can be attached to a backpack or stand on its own with a fold-out kickstand. It can connect and deliver power to a device with a USB-C cable, or the sun’s rays can be used to charge an included power bank that can power other devices later. But Lenovo hasn’t announced plans to put it into production yet.

Lenovo created the concept to “bridge the gap between functionality and environmental awareness,” giving users easy access to an alternative energy source. You’d need the weather to cooperate for a while to fully charge the Yoga Solar PC using its relatively small solar panel, but it could be a welcome fallback for when a power outlet is nowhere in reach.

A Paris-based creative studio has announced a minimalist turntable with controls streamlined to just a play button and a volume knob. Waiting For Ideas’ PP-1 — short for Plug and Play — doesn’t even have a visible tonearm, and it’s made from a solid block of anodized aluminum requiring about 12 weeks of production time to manufacture. That makes it easier to understand why the PP-1 has a €5,800 (around $6,012) price tag.

Although companies like ELP of Japan sell turntables that swap needles and tonearms for laser pickups, the PP-1 does feature more traditional record player hardware. The studio worked with a company called Miniot that created a similarly minimal turntable lacking a visible tonearm. Waiting for Ideas adapted Miniot’s technology so that the PP-1’s inverted cartridge and stylus are hidden behind a closing door system and kept out of sight when there’s no record sitting on its platter.

There’s also no speed control dial on the PP-1. Miniot’s technology can automatically detect if a record needs to be played at 33 or 45 RPM, and constantly recalculates the speed of the motor to ensure optimal playback at all times.

It’s not only a striking piece of design, it’s also a high-quality turntable. But if you’re a vinyl enthusiast, you’ll need to remember to place your records upside down on the PP-1 to hear the tracks you want.

Power is supplied by a single 5V USB-C port, and the PP-1 features just a single 3.5-millimeter audio jack for connecting it to either active or passive speakers that require an additional amplifier.

If you’re looking for a complete sound system, Waiting For Ideas has also created a set of passive 85-decibel 80W speakers matching the dimensions of the PP-1. They’re now available for preorder for €3,200 (around $3,320) and will take 12 weeks to make. You’ll just need to budget for a separate amplifier because the studio unfortunately doesn’t make a matching one of those.

Cricut has announced new versions of its crafting machines designed to print, cut, and emboss various materials using a collection of swappable tools. The new Cricut Maker 4 and Cricut Explore 4 are the first updates to both machines in nearly four years and offer faster cutting speeds for some materials, improved accuracy, and cheaper price tags. 

The machines will be available starting on February 28th, 2025. They’ll still start at $249.99 for the Cricut Explore 4, and at $399.99 for the Cricut Maker 4, and both will be available in sage and seashell color options. The four-year-old Cricut Explore 3 sells for $319, while the Maker 3 is $439, so the cheaper price tags for the 4-series line could help make the new machines more accessible to new users. Both models come with a bundle of crafting materials to complete 10 initial projects.

The Cricut Maker 4 and Explore 4 look nearly identical to their predecessors but are up to twice as fast when cutting through materials like cardstock and vinyl, Cricut says. The speed improvements won’t be quite as dramatic when using thicker materials, but the upgrade will still appeal to crafters who sell their creations on sites like Etsy and are looking to upgrade their output.

Cricut has also introduced a new optical sensor on both models that works alongside a light that better illuminates materials, according to CNET. The upgrade should help improve cutting accuracy, no matter what the lighting conditions are in your crafting room.

Although there are differences between both machines’ capabilities, they’re mostly dependent on the types of projects you’re looking to create. The pricier Cricut Maker 4 is designed to work with over 300 different types of materials, including thicker options like leather and balsa wood, and a wider variety of cutting and embossing tools. The cheaper Cricut Explore 4 is limited to around 100 different materials, including thinner stock like vinyl, card stock, and iron-ons.

In 2021, the company frustrated existing users with plans to limit monthly uploads to its Design Space software used to prep projects before sending them to the machines. Subscription fees were announced for users wanting to expand the number of designs they could upload, but after much backlash, Cricut scrapped those plans entirely.

While the new machines don’t require subscriptions, the company still offers a Cricut Access subscription for users who heavily rely on pre-made designs and projects available through its Design Space app. Cricut Access also expands the number of fonts and images available through the app and includes discounts on materials.

DJI has announced the third iteration of its drone-in-a-box solution designed for missions like safely inspecting power lines and emergency response. As with previous versions, the DJI Dock 3 is small enough to be transported in the back of a pickup truck, but it’s the first that allows DJI’s new Matrice 4D and Matrice 4TD drones to be launched from a moving vehicle using an optional gimbal mount accessory.

Although the company hasn’t revealed how much that special mount for mobile launches will cost, the new DJI Dock 3 will be available in two bundles priced for enterprise customers with sizable budgets. It can be purchased with the DJI Matrice 4D drone for $21,059, or with the Matrice 4TD for $23,409. Those prices don’t include installation, deployment services, or optional hardware upgrades and software features.

The new dock carries forward several features from previous versions like a built-in weather station, antennas, surveillance cameras, and an internal backup battery. It still needs access to power and the internet, but can be upgraded with a cellular 4G dongle for remote deployment.

The DJI Dock 3 has an improved IP56 rating for dust and water-resistance and its operational temperature range has been expanded to as hot as 50 degrees Celsius, or as cold as -30 degrees Celsius — although DJI says preheating will be needed when temperatures are that cold.

It can communicate with drones on missions as far as 10 kilometers away, but that range can be extended to up to 25 kilometers for fixed deployments (such as on a highrise building) through the use of relays mounted at elevated locations. But that’s assuming your local jurisdiction allows drones to fly automated routes or be remotely operated at those distances. In the US, the FAA requires drone operators to obtain a Beyond Visual Line of Sight (BVLOS) waiver for remote operation at extended distances.

The Dock 3 is designed to work with new IP55-rated water and dust-resistant versions of the DJI Matrice 4 Series of drones that launched earlier this year. The Matrice 4D and 4TD both feature ant-ice propeller blades, 47 minute flight times, and a combination of wide-angle, medium tele, and telephoto cameras. The Matrice 4TD has expanded night time capabilities with the addition of an infrared thermal camera and a near-infrared auxiliary light for added illumination.

Correction, February 28th: An earlier version of this article misstated the DJI Dock 3 was an autonomous solution. Automated flight routes need to be programmed by human operators.

Amazon announced a new version of its smart assistant today. Alexa Plus comes with expanded capabilities, the company appeared to demonstrate, like finding concert tickets on your behalf or ordering an Uber to pick up someone at the airport. The upgraded smart assistant will also make it easier to have more natural conversations with it, but Amazon will be charging users for those new abilities for the first time.

Free early access to Alexa Plus will begin in late March 2025 in the United States for customers with eligible Echo Show devices. They’ll be notified through email and device notifications once access to Alexa Plus has been granted, but they will have to opt in to using it.

Subscriptions for Alexa Plus start at $19.99 per month once early access ends, but it’s free for Prime users. Given that Prime costs $14.99 per month, or $139 per year, it’s hard to imagine anyone opting to pay for Alexa Plus on its own. Many of the smart assistant’s new capabilities, such as jumping to the part of a movie where a specific song is playing, will also be dependent on services like Amazon Music and Amazon Prime Video. So to fully take advantage of Alexa Plus, a Prime membership almost seems mandatory.

There were no hardware announcements made at today’s Amazon event, but the company has confirmed that Alexa Plus will work on “almost every” Alexa device released so far, including the Alexa mobile app, as well as Fire TVs and tablets. However, the Echo Show 8, 10, 15, and 21, which all feature touchscreen interfaces, will be prioritized during early access. The company has also confirmed that certain older generation Echo devices, including the Echo Tap and first-generation versions of the Echo, Echo Dot, Echo Plus, Echo Spot, and Echo Show, won’t support Alexa Plus. Amazon’s Astro robot will also only be compatible with the original Alexa.

Update, February 26th: Added additional details on device compatibility and availability.

8BitDo has released an upgraded version of its Ultimate controller now available to preorder through Amazon for $59.99 in purple, black, and white color options. The new 8BitDo Ultimate 2 features a similar asymmetrical stick layout to 8BitDo’s original Ultimate controller that launched in 2022, but adds additional buttons, interactive LED lighting, and tunneling magneto-resistance (TMR) joysticks that are even more durable than Hall effect sticks.

We still don’t know if Nintendo will switch to Hall effect joysticks for the Switch 2, but companies like GuliKit have already moved away from them in favor of TMR. The technology has already long been used in hard drives to boost storage capacities. For controllers, it allows for joysticks that draw less power, which can improve battery life while nearly eliminating the risk of joystick drift that plagued the Nintendo Switch and other modern controllers before magnetic Hall effect technology was adopted.

8BitDo is also bringing over the RGB Fire Ring lighting effects first introduced on its smaller-sized Ultimate C wired Xbox controller. As the branding implies, both joysticks feature a ring of color-changing LEDs around their base with several lighting modes that react to button presses (including the triggers) or the direction the joysticks are being pushed.

The Ultimate 2’s triggers still use Hall effect sensors for improved accuracy and reliability, but 8BitDo has introduced a switch that lets you swap their behavior between longer draw triggers ideal for racing games and short pull tactile triggers for quicker responses while playing first-person shooters. And like the budget-minded 8BitDo Ultimate 2c, the Ultimate 2 has an extra pair of customizable shoulder buttons on the back.

The controller connects to 8BitDo’s Ultimate Software V2, which is also available as a mobile app, allowing buttons to be remapped and the sensitivity of joysticks and triggers to be adjusted. The controller has support for motion controls for games that support it, and a charging dock is still included.

Connectivity options include Bluetooth, a wired USB-C connection, or a low-lag 2.4GHz wireless connection using an included USB-C dongle. But like the cheaper Ultimate 2C, 8BitDo has only made its new Ultimate 2 controller compatible with PCs running Windows 10 and later or Android devices running Android 9.0 and newer.

Versions of the new Ultimate 2 compatible with the Xbox, iOS, or Nintendo Switch (and presumably the Switch 2) haven’t been announced yet, but 8BitDo previously released additional versions of the original Ultimate controller with alternate compatibility.

Anker has released a new HDMI to USB-C cable that allows you to connect a mobile device to an external display without draining its battery. The Anker Nano USB-C to HDMI Cable Adapter, now available through Amazon for $28.99, is Thunderbolt 5 compatible and includes a USB-C port on the HDMI connector so you can charge your device at up to 140W speeds using a power adapter.

USB-C to HDMI cables are common, but most don’t incorporate power delivery. That’s not an issue when using them with devices like laptops that have multiple USB-C ports, but devices like smartphones, tablets, and handheld consoles with a single USB-C port won’t be able to charge while connected to a display. You can also use USB-C HDMI hubs or an HDMI adapter like the one Apple sells for $69.99, but then you’ll need to supply your own HDMI cable.

Anker’s solution simplifies things, and while the version currently offered is only three feet long, a six foot version will eventually be introduced.

Companies like Ugreen already offer similar solutions that also support 4K displays at up 60Hz, but are limited to 100W of power delivery. If you need more than that, Anker’s got you covered.

Unfortunately, while Anker says there’s a long list of devices compatible with the cable, including iPads, iPhones, ThinkPads, Chromebooks, Google Pixels, Samsung Galaxy phones, and handhelds like the Steam Deck and Asus ROG Ally, it can’t serve as a portable docking solution for the Nintendo Switch. And because of the size of the HDMI connector on the end of the cable, it’s also not compatible with various monitors from Dell, LG, and Samsung because of where their HDMI ports are located.

The BlackBerry might be dead, but one of its best ideas — a tiny thumb-friendly keyboard for phones — lives on in the Clicks keyboard case, which will soon be available for several Android devices.

Over 100,000 of the original Clicks keyboard cases have been sold around the world, the company says in a press release, but since launching in January 2024, it’s only been compatible with iPhone 14, 15, and 16 models. Starting in April, the cases will be available for several Motorola, Google Pixel, and Samsung Galaxy devices and will work with a new Android version of the Clicks Keyboard mobile app, allowing the keyboard’s functionality to be customized, including how the caps lock, return, and Clicks keys work.

Preorders for all of the Android Clicks keyboard cases start today through the company’s website, but availability varies by device. The Google Pixel 9 and Pixel 9 Pro (not the XL) version, expected to ship at the end of April, will sell for $99 until March 21st and then increase in price to $139. Color options include surge — described as a “high-vis yellow-green” — and black.

The Motorola Razr Plus (2024) and Razr (2024) version of the Clicks case, available in electric blue or black, can be preordered for $49 to lock in a price of $99. After March 21st, preorders will still be $49, but pricing for the case, which is expected to ship in late May, will jump to $139. It’s the same story for the Samsung Galaxy S25 version of the case, although it’s not expected to ship until June and will be available in red and black.

The Android version of the Clicks case carries over the same keyboard design as the iPhone version, including the use of round keys that are slightly angled to improve the typing experience. (Instead of copying the more ergonomic design of the BlackBerry’s keys — an approach that didn’t end well for the Ryan Seacrest-backed Typo case.)

Some of the key labels are slightly different, but like the original iPhone version, the Android Clicks case still allows keyboard shortcuts to be used for launching apps or quickly navigating Android, including a dedicated key for accessing Google Gemini. It also features backlighting, and instead of a battery, it draws all the power it needs from each Android device’s USB-C port.

The physical design of the case is also similar, although the version for the Motorola Razr Plus and Razr (2024) is split into two halves, allowing both devices to still fold. Clicks is also adding a “strong magnetic array” to the two Pixel cases — a feature the company introduced with the iPhone 16 version to improve MagSafe compatibility — making it a bit easier to use wireless chargers with Google’s latest smartphones.

Looking for an accessory that can keep up with your busy lifestyle? Nik Bentel Studio has created a leather purse with a remote control car built into its base.

The battery-powered RC Car Bag is four wheel drive, and while its rubber tires can handle minor obstacles like discarded napkins and crumbs while zipping across a dining table, its tiny wheels mean it’s unfortunately not going to be much of an off-roader. Its creators claim the bag has a top speed of nine miles per hour, and it includes a stack of tiny orange pylons if you want to set up an obstacle course and test your driving skills after dinner while you wait for your server to bring the check.

The included pistol grip style controller has a range of about 30 feet, and while’s there room inside the purse to store the remote, it doesn’t look like it leaves space for much else. That could make the RC Car Bag’s $295 price tag a tough sell, but fashion doesn’t always have to be practical, does it?

A little more storage capacity would be a welcome upgrade, but adding Bluetooth compatibility and the option to control the RC Car Bag using a mobile app on a smartphone would also let you leave the cumbersome remote control at home on date night. The bag is also only available in black, but other color options, including something close to Ferrari’s iconic Rosso Corsa red, would potentially help broaden the appeal of the accessory to racing fans.

Although Nik Bentel Studio might not be the most recognizable name in fashion, it’s created a collection of fun tech-inspired accessories including slim wallets that look like real-life versions of Windows and macOS’ folder icons.

Panasonic has announced an upgrade version of 2019’s Lumix S1R with a new sensor, smaller body, faster autofocus, and video recording that tops out at 8K at 30 frames per second. Although the Lumix S1RII’s new 44.3-megapixel back-side illuminated CMOS sensor is smaller than the 47.3-megapixel sensor in its predecessor, its improved video capabilities, including capturing 5.8K Apple ProRes RAW HQ or ProRes RAW without an external recorder, will appeal to shooters looking for a highly capable hybrid camera.

The Panasonic Lumix S1RII is expected to be available in late March for $3,299.99.

Using a faster hybrid autofocus system that introduces phase-detect AF alongside the S1R’s contrast AF, the Lumix S1RII offers improved eye and face detection, along with better AI-powered tracking accuracy for moving human subjects. It can also automatically detect and focus on a wide variety of subjects, including animals, cars, motorcycles, bikes, trains, and airplanes.

The camera can capture full-resolution 12-bit RAW still images at up to 40 frames per second using its electronic shutter, or up to 10 frames per second (nine when capturing 14-bit RAW images) using its mechanical shutter’s “High Speed Plus” mode.

For photographers wanting more than 44.3-megapixels of resolution, the S1RII offers a handheld high-resolution mode that can capture still images at 177-megapixels by shifting the sensor half a pixel and capturing and merging multiple exposures.

In-body image stabilization improves to eight stops of shake reduction, or seven stops when using the S1RII with a telephoto lens that supports its own image stabilization. When capturing video, Panasonic says the camera features cropless electronic image stabilization with distortion correction that reduces “peripheral distortion while preserving the original angle of view.”

The Lumix S1RII includes a 5.76 million dot OLED viewfinder as well as a three-inch articulated 1.84 million dot touchscreen LCD display that flips out and rotates up and down for videographers. That screen is slightly smaller than what the original S1R featured, but then, the new S1RII is smaller and lighter than its predecessor — 1.75-pounds compared to 2.24 pounds.

Both SD USH II and CFexpress Type B card slots are included, but videos can also be captured to an external SSD drive using the camera’s 10Gbps USB-C port. The Lumix S1RII also features a full-sized HDMI port for connecting it to a larger display.

SpaceX believes it knows what caused the explosion during the seventh test flight of its Starship spacecraft and Super Heavy booster on January 16th, 2025. Fires in the aft section of Starship, located between the bottom of its liquid oxygen tank and rear heat shield, caused “all but one of Starship’s engines to execute controlled shut down sequences” leading to a loss of communication and eventually the spacecraft’s safety system triggering its own destruction.

The goal of the seventh test flight was to test several upgrades SpaceX made to its heavy-lift rocket system. After a successful launch and completing a full duration burn, the Super Heavy booster separated from Starship and triggered a boostback burn designed to return it to the launch site. Following a landing burn, the Super Heavy booster was successfully caught mid-air by the launch tower at Starbase for the second time.

The mission didn’t go quite as well for Starship. Approximately two minutes after the spacecraft ignited its second stage Raptor engines following separation, a flash was observed in the aft section of Starship known as the attic, followed by sensors detecting a pressure rise from a leak. Two minutes after that, a second flash was observed, followed by sustained fires in the attic section that eventually “caused all but one of Starship’s engines to execute controlled shut down sequences and ultimately led to a loss of communication with the ship.”

Post-flight analysis indicated that Starship’s Autonomous Flight Safety System triggered a self-destruct approximately three minutes after the ground crew lost contact with the spacecraft. According to SpaceX, the most probable cause of the incident was vibrations that were much stronger during the flight than had been experienced during testing. That resulted in increased stress on the propulsion system’s hardware and, eventually, a propellant leak that “exceeded the venting capability of the ship’s attic area and resulted in sustained fires.”

The explosion created falling debris that looked more like a meteor shower over the islands of Turks and Caicos to several tourists who shared videos of the aftermath on social media. Although SpaceX says all the “debris came down within the pre-planned Debris Response Area,” the Federal Aviation Administration briefly slowed and diverted several flights in the area on January 16th as a result of the incident.

As part of the investigation into the explosion involving SpaceX, the FAA, NASA, the National Transportation Safety Board, and the U.S. Space Force, the company conducted a 60-second static test fire with the Starship that will be used on an upcoming eighth flight. Following the results of that test, SpaceX has made hardware changes to fuel feedlines as well as adjustments to propellant temperatures and operating thrust targets.

The company has also added additional vents and a “new purge system utilizing gaseous nitrogen” to the attic section of Starship designed to make that area more robust to propellant leakage.

SpaceX currently plans to launch an eighth test flight of Starship on February 28th, 2025, but is still “working with the FAA to either close the mishap investigation or receive a flight safety determination, along with working on a license authorization to enable its next flight of Starship.”

Google is planning to move away from sending six-digit authentication codes through SMS messages as a two-factor authentication tool for Gmail, Forbes reports. Instead, over the next few months, QR codes will be rolled out as a replacement for SMS codes in an attempt to “reduce the impact of rampant, global SMS abuse,” Gmail spokesperson Ross Richendrfer told Forbes.

Google uses SMS codes to both verify that it’s dealing with the same person who created or owns a Gmail account, and as a deterrent to prevent criminals from creating “thousands of Gmail accounts in order to distribute spam and malware,” Richendrfer says.

But while SMS codes are better than using no two-factor authentication at all, the approach comes with its own security risks. Criminals can trick or force users into sharing a code that’s been sent over SMS messaging, and users may not have immediate access to the device receiving the codes. It’s also dependent on each carrier’s own security practices, and how diligent their support teams are at preventing fraudsters from getting access to someone else’s mobile number.

The move will also help Google avoid a more recent scam called traffic pumping or toll fraud. “It’s where fraudsters try to get online service providers to originate large numbers of SMS messages to numbers they control, thereby getting paid every time one of these messages is delivered,” Richendrfer and Google’s Kimberly Samra explained to Forbes.

Once the change has been implemented, instead of verifying phone numbers by sending a six-digit code, a QR code will be presented that users can scan using the camera app on their smartphones. It will eliminate the risk of users being tricked into sharing codes since they no longer exist, and it takes security risks introduced by phone carriers, including unwanted SIM swapping, out of the equation entirely.

Sigma has announced a new compact 24.6-megapixel full-frame camera called the BF with a clean, minimalist design featuring just four button controls and a dial. The BF’s body is milled from a single block of aluminum, its user interface has been redesigned with a “completely new information structure compared to conventional digital cameras,” according to a release from the company, and it trades a memory card slot for a built-in SSD.

The Sigma BF will be available in black or silver finished for $1,999 and is expected to ship sometime in April 2025. That pricing doesn’t include a lens. The BF is compatible with the L-Mount lens standard initially developed by Leica but now used by Panasonic and Sigma as well. Sigma will be updating its I Series collection of prime lenses with a new silver color option to match the BF.

The BF’s minimalist design is most apparent on the back of the camera. Next to a 3.2-inch touchscreen display that doesn’t feature any articulation are three touch controls featuring haptic feedback so they feel like you’re touching real buttons. Above them are a dial for navigating menus with an additional haptic button in the center, and a smaller status monitor screen that shows settings options so the camera’s main display doesn’t get overly cluttered with information. You’ll find the shutter button on top of the camera, next to a couple of small microphone holes.

The streamlined user-interface on the BF surrounds the live preview with shooting-related settings including shutter speed, aperture, ISO, and EV compensation. Secondary settings are hidden in an optional menu, while camera management functions are buried in a system menu.

As is becoming more common with digital cameras, Sigma has included 13 different color modes with the BF, allowing photographers to achieve a specific look in-camera without the need for post-processing. These include options like standard and rich, as well as more creative modes like forest green, sunset red, warm gold, cinema, and monochrome.

You won’t find a memory card slot on the Sigma BF, but a USB-C port for charging and transferring files is included. Inside is a 230GB SSD which the company says is enough to store 14,000 JPEGs or 4,300 uncompressed RAW files. The camera can also capture 6K video at up to 29.97 frames per second, and can store up to 2.5 hours of video at its highest quality setting.

At full resolution, the Sigma BF can capture images at up to eight frames per second and it relies on a hybrid autofocus system combining phase and contrast detection. Its AF system also uses what the company describes as “state of the art algorithms” to detect and quickly focus on specific subjects including people, dogs, and cats.

According to recent observations, the European Space Agency now says the probability of asteroid 2024 YR4 hitting our planet has dropped to just 0.16 percent. That follows an announcement yesterday from NASA’s Center for Near-Earth Object Studies at its Jet Propulsion Laboratory saying there was a 0.28 percent chance the asteroid would impact Earth.

Earlier this week, the odds of the asteroid impacting Earth on December 22nd, 2032, were closer to 3.1 percent, which was “the highest impact probability NASA has ever recorded for an object of this size or larger,” according to the agency.

The latest trajectory estimates come from new observations made after a week of limited visibility caused by a full moon. Ground-based telescopes will continue to track 2024 YR4 until April when its distant orbit will make observations from Earth impossible until it approaches again in 2028. The James Webb Space Telescope’s infrared capabilities will be used in March and May to observe the asteroid’s movements. Data gathered by the space telescope will help scientists more accurately calculate 2024 YR4’s size, what it’s made of, and the threat it poses.

First identified on December 27th, 2024 by the Asteroid Terrestrial-impact Last Alert System (ATLAS) located in Chile, trajectory calculations showed 2024 YR4 was on a potential collision course with Earth after a few weeks of observation.

The asteroid is estimated to be between 130 and 300 feet in size and would impact the Earth with about 7.7 megatons of energy, according to Astronomy.com. That’s not powerful enough to wipe out humanity the same way an asteroid hit is believed to have done in the dinosaurs, but it’s more than enough energy to devastate a city with a direct hit.

Although the odds of the asteroid hitting the Earth have been dramatically reduced, NASA also says the new data has increased the chances of 2024 YR4 impacting the moon to one percent.

CNEOS’ Sentry page will be continuously updated with details on 2024 YR4’s latest impact probability.

American Airlines has announced support for Apple’s Share Item Location feature, potentially making it easier for passengers to be reunited with lost luggage tracked with an AirTag. The airline transported 226,405,000 passengers around the world last year, making it the busiest and one of the largest carriers in the US.

Share Item Location was first introduced as part of the iOS 18.2 update released last December. AirTag users are able to generate a shareable link within Apple’s Find My app on iPhones, iPads, or Macs allowing others to access an interactive map showing the location, or last known location, of a missing item.

The link will be deactivated when a lost item is recovered and the location sharing can be turned off at any time. The links also automatically expire after seven days.

“We’ve introduced the ability for customers to easily and securely share the location of their AirTag or Find My network accessory directly with the airline,” an American Airlines spokesperson told View from the Wing’s Gary Leff. “Customers can generate a link through Apple’s Share Item feature available on iOS 18.2 or later and share it with American in the rare case when a bag is delayed for any trips with a segment from or to a U.S. airport. Customers just need to scan the QR code at the baggage office to start their claim and provide their information.”

Airlines like United, Delta, and Air Canada integrated the Share Item Location feature into their lost luggage procedures soon after it was released. Additional carriers, including Lufthansa Group and Virgin Atlantic, announced support earlier this month.

DJI has announced a new version of the smallest camera stabilizer in its Ronin series. Like last year’s RS 3 Mini, the upgraded RS 4 Mini is a more compact, lighter, and cheaper alternative to DJI’s RS 4 and RS 4 Pro stabilizers, but designed for smaller mirrorless cameras and smartphones. Although it’s slightly heavier than its predecessor, the RS 4 Mini introduces subject tracking through an optional module, similar to what DJI recently launched with its Osmo Mobile 7 Pro.

The DJI RS 4 Mini is now available through the company’s online store in three versions. On its own, the gimbal sells for $369, but the $459 DJI RS 4 Mini Combo adds the new tracking module and a Mini Briefcase Handle accessory. There’s also the $478 DJI RS 4 Mini Creator Combo that includes the same accessories plus a smartphone holder for mobile creators looking to get more creative.

It’s a little heavier than its predecessor — 890 grams (a little under two pounds) up from 795 grams — but the RS 4 Mini offers the same capacity with support for cameras weighing up to 4.4 pounds. Battery life gets a boost from 10 hours to 13 now, while a 30-minute fast charge provides five hours of use.

Even with the extra weight the RS 4 Mini could be worth the upgrade thanks to DJI’s new RS Intelligent Tracking Module. It features its own camera and DJI’s tracking technology allowing the gimbal to autonomously follow and keep a moving human subject in frame from over 32 feet away without the need for DJI’s Ronin mobile app. Tracking can also be stopped and started remotely using an open palm hand gesture for creators working alone, while a new Responsive mode improves performance when capturing fast moving subjects.

Other upgrades include faster switching to vertical shooting mode, a new Teflon coating to further smooth out movements and balancing, and a smaller and lighter horizontal briefcase handle allowing shots to be more easily captured from lower angles.

Aside from an October 2025 release, the teaser Lego and Nintendo released in January for their upcoming Game Boy collaboration was light on details. But according to an Instagram account that Video Games Chronicle says has a reliable track record for sharing accurate details about new sets before Lego does, the brick-built Game Boy will sell for $59.99 when it launches on October 1st, and will include 421 pieces.

Falconbricks Studios shared the details on Instagram earlier today, including the set number 72046 that matches earlier leaks, but pricing that’s slightly cheaper than what has been anticipated.

However, $59.99 for 421 pieces — which works out to about 14 cents per brick — makes this upcoming set one of the more expensive Nintendo and Lego collaborations. The $129.99 Super Mario World: Mario & Yoshi set, released last October, came out to about 11 cents per brick, while the blocky Nintendo Entertainment System, which is now priced at $269.99, still works out to about 10 cents per brick. Non-themed sets, like the recently released $59.99 Medieval Dragon, sell for about eight cents per brick.

The Lego Game Boy will likely be the second most anticipated Nintendo handheld this year, following the official reveal of the Switch 2 last month. But we won’t know how much Nintendo’s flagship console will cost, or when it will be released, until the Switch 2 Nintendo Direct presentation on April 2nd.

Canon has announced a new point-and-shoot compact camera called the PowerShot V1 designed to appeal more to video content creators.

The V1 pairs a wide-angle lens with a new sensor from the company, and it’s the first PowerShot model to introduce “moods” that customize the look and feel of videos, plus a product demo mode that prioritizes autofocus for objects held close to the camera. It also has a built-in cooling fan so it can record at 4K/60p for over two hours without overheating.

The PowerShot V1 was announced ahead of the CP+ photography show taking place in Yokohama, Japan next week. Canon has revealed details on most of the V1’s functionality, but limited details on availability. Canon’s Japan site lists the PowerShot V1 with a 148,500 yen price tag, or around $990. It will launch in Japan, Korea, Honk Kong, China, and Taiwan in late April 2025, but wider availability, including the US, is still to be determined. More details may be announced next week.

The V1’s new Type 1.4 sensor is similar in size to a Micro Four Thirds sensor, but features a 3:2 aspect ratio that’s slightly wider and shorter. The camera can capture 22.3-megapixel still images at up to 15fps with its mechanical shutter, or up to 30fps with its electronic one. When capturing 10-bit video at 4K/30p the entire width of the V1’s sensor is used, but when boosting that to 60p a 1.4x sensor crop is used to reduce processing needs and heat generation.

The new sensor is paired with a 16-50mm equivalent f/2.8-4.5 wide-angle zoom lens and Canon’s Dual Pixel AF II system borrowed from its EOS R6 Mark II. That gives the V1 autofocus features that include subject tracking, image stabilization that helps maintain that subject’s position in frame, and the automatic detection of people, cars, animals, and even pupils.

The V1 doesn’t have an electronic viewfinder, so framing and menu navigation is handled entirely by a three-inch vari-angle LCD touchscreen on the back. But it can be tethered to a smartphone using a Bluetooth, Wi-Fi, or USB-C connection with the Canon Connect app, and it can be used as a USB webcam on a computer without the need for any adapters.

There’s no built-in flash, but Canon includes a multi-function hot shoe for adding third-party solutions. The PowerShot V1 also includes a three-stop ND filter, a headphone and microphone hack, HDMI, and a single SD card slot.

Ring has announced its first outdoor security camera that supports 2K video at launch. Ring’s outdoor cameras previously only supported 1080p video, but earlier this year, the Amazon-owned company released software updates upgrading its Floodlight Cam Pro and Spotlight Cam Pro with 2K capabilities. The new Ring Outdoor Cam Plus works in 2K video right out of the box and adds improved Wi-Fi and low-light capabilities.

The Ring Outdoor Cam Plus is now available for preorder through Ring’s website and Amazon for $99.99 and is expected to ship on March 26th, 2025. Core features include real-time alerts when motion is detected, live streaming from the camera, and two-way talk capabilities. More advanced features, such as recording and saving motion events and package detection, require subscriptions that start at $4.99 per month, or $49.99 per year, for Ring Home Basic.

The new Outdoor Cam Plus is an upgrade to Ring’s existing Stick Up Cam. It can also be powered by a battery, a solar panel accessory, or be plugged in with an upgrade to a USB-C port. Dual-band Wi-Fi is now supported, and an easy-to-install mount is included, with expanded functionality allowing it to be attached to ceilings.

The camera is weather-resistant so it can be used indoors or out. It also features an expanded field of view and Ring’s Low-Light Sight technology that relies on “advanced image processing techniques to show a clear, colorful view even in near dark conditions,” according to a press release from the company.

The plug-in version of the Outdoor Cam Plus also supports 24/7 recording with the ability to find key moments using Ring’s AI-powered Smart Video Search. However, that functionality requires a Ring Home Premium subscription that’s $19.99 per month or $199.99 per year.

For the first time since 2018, King Jim, a Japanese stationery company, is making one of its distraction-free writing tools available in the US. The Pomera D250 launched in Japan in 2022 and while it looks like a compact laptop, its functionality is limited to being a digital typewriter. There’s no email, no social media, and no web browser. King Jim’s new Pomera D250US is similarly focused on that singular task, but with a keyboard featuring a US layout and an English dictionary for spell checking.

King Jim is making the Pomera D250US available through an Indiegogo crowdfunding campaign that has already surpassed its modest $10,000 funding goal. Early backers can preorder one for $374, while full retail pricing will be closer to $499, with shipping expected as early as March 2025. That’s more expensive than the $349 Freewrite Alpha which also minimizes distractions, and pricier than even many Chromebooks. But for those you’ll need to BYOD — Bring Your Own Discipline.

The last Americanized Pomera device, the DM30, featured a six-inch E Ink screen and a compact folding design with a keyboard that split into three sections. The 10.3-inch wide clamshell Pomera D250US doesn’t fold quite as small, but it trades E Ink for a slightly larger seven-inch 1024 x 600 black-and-white LCD display that won’t suffer from slow refresh speeds or ghosting.

Battery life is claimed to be up to 20 hours, and the D250US will be fully booted and ready for you to pound away on its scissor-switch keyboard a few moments after you open its screen.

Although built-in storage is limited to 1.3GB, that’s still enough to store a lot of text. Should you find yourself needing more, storage can be expanded with SD cards up to 32GB in size. Documents can be transferred to a PC over USB-C, or Wi-Fi and Bluetooth using the Pomera Link mobile app available for iOS and Android. If you don’t have access to a wireless network, the DM250US can also convert documents to a series of QR codes (up to 999 of them in succession) offering an alternate and tedious way to transfer text to the mobile app using your smartphone’s camera.